JALS
Equipment
JALS
Equipment
유기물, QD 및 하이브리드 LED의 효율성
각도 의존적 PL 및 EL 스펙트럼
발광 다이폴 또는 이미터의 방향 및 위치
시야각
손쉬운 시료 취급
효율성: EQE, Lm/W 및 Cd/A
각도 의존적 PL 및 EL 스펙트럼
방출 각도별 스펙트럼 및 색상
전류-전압-휘도(IVL)
편광 방출
각도 범위: -90° ~ +90° / 광학 해상도: 1°
스펙트럼 범위: 200 ~ 1100nm / 스펙트럼 해상도: 0.1nm
전압 범위: -20 ~ +20V
전류 범위: 1nA ~ 100mA/최소 분해능 전류: 1nA
편광판, 편광판 또는 편광판 없음 및 반원통형 렌즈
기본 여기 파장: 365nm
유기 및 페로브스카이트 발광 박막에 대한 각광 광발광(PL) 분광법.
OLED 및 기타 발광 소자에 대한 각도 전계발광(EL) 분광법.
상단 및 하단 발광 OLED 구조와 호환
발광 다이폴의 방향과 위치를 결정
통합 데이터 분석을 통해 클릭 한 번으로 다이폴 방향을 결정
간편한 샘플 정렬.
측정: EQE, lm/W, Cd/A, CRI, CIE
편광판과 매크로 추출 렌즈 포함.
여러 광원 사용 가능
JALS 시뮬레이션 소프트웨어를 사용하면 에미터의 오리엔테이션을 얻기 위해 각도별 PL 세기를 측정합니다. p-편광 및 s-편광 각도별 방출 강도를 측정할 수 있습니다.
JALS로 측정한 각도 EL 스펙트럼(기호)과 추출된 에미터 위치를 사용하여 수행한 시뮬레이션 결과(선)를 비교합니다.
J-OSTD를 사용하여 OLED의 각도별 EL 스펙트럼에서 추출한 엑시톤 밀도 프로파일.
JALS에서 측정한 각도 p-pol EL 스펙트럼(기호)과 J-OSTD에서 수행한 시뮬레이션 결과(선)를 비교한 결과입니다.
컬러 효율성
시야각
효율성: EQE, Lm/W 및 Cd/A
방출되는 다이폴 또는 에미터의 방향 및 위치
에미터 방향
방출 각도별 스펙트럼 및 색상
편광 방출
효율성
CIE 좌표
색온도, CRI
스펙트럼 강도
발광 강도
Origin and Control of Orientation of Phosphorescent and TADF Dyes for High-Efficiency OLEDs
Kwon-Hyeon Kim and Jang-Joo Kim*
Adv. Mater. 2018, 30, 1705600
https://onlinelibrary.wiley.com/doi/full/10.1002/adma.201705600
It has been known for decades that the emitting dipole orientation (EDO) of emitting dyes influences the outcoupling efficiency of organic light-emitting diodes (OLEDs). However, the EDO of dopants, especially phosphorescent dopants, has been studied less than that of neat films and polymer emitting layers (EMLs) due to the lack of an apparent driving force for aligning the dopants in amorphous host films. Recently, however, even globular-shaped Ir complexes have been reported to have a preferred orientation in doped films and OLEDs. External quantum efficiencies (EQEs) higher than 30% have also been demonstrated using phosphorescent and thermally activated delayed fluorescent dyes (TADF) doped in EMLs. Here, recent results on the EDO of phosphorescent and TADF dyes doped in host films, and highly efficient OLEDs using these dyes are reviewed. The origin and control of the orientation of phosphors are discussed, followed by a discussion of future strategies to achieve EQEs of over 60% without a light extraction layer, from the material point of view.